ar4020b010002ta
Checking and adjusting straight-ahead position of front wheels
Type ar · emne 40.20 · version 0106 · 2019-02-15
Gælder for: Model 958.0/1 Model 958.20/25 Model 958.260/264 Model 958.43/44/45/46 Model 958.471/472/478
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.20 Undervognsudmåling — Serie 958 (modeller 0**, 1**, 20*, 25*, 260, 264, 43*, 44*, 45*, 46*, 471, 472, 478)
EinPAS 20 Undervogn › 20.10 Undervognsudmåling › 20.10.20 diagnose/kontrol/udmåling/indstilling — Serie 958 (modeller 0**, 1**, 20*, 25*, 260, 264, 43*, 44*, 45*, 46*, 471, 472, 478)
AR40.20-B-0100-02TA
| Checking and adjusting straight-ahead position of front wheels
|
|
|
Model
| 958.0/1
|
Model
| 958.20/25
|
Model
| 958.260/264
|
Model
| 958.43/44/45/46
|
Model
| 958.471/472/478
|
1
| Positioning the projectors (5) on the projector bracket (4) of the 1st front axle
|
2
| Support the two measuring stands (11) at left and right of the 1st rear axle and align in a right angle in relation to the vehicle
|
3
| Direct the light beam of the left side projector (5) on the left side measuring stand (11)
|
|
| Take note of the indicated value (for ex. 28).
|
4
| Direct the light beam of the right side projector (5) on the right side measuring stand (11)
|
|
| Also take note of the indicated value (for ex. 24).
|
5
| Turn the steering wheel until the two values show the same value
|
|
| For two driven front axles:
|
|
|
|
|
| The position test in straight ahead line on the 2nd front axle has to be carried out in an analog way as on the 1st front axle.
|
