ar4015g0410b

Remove/install radial shaft sealing rings of tire pressure control system

Type ar · emne 40.15 · version 0102 · 2014-08-05

Gælder for: MODEL 405.05/09/10/11/12/20/22 with CODE A30 (Tire pressure control system (tire control)) MODEL 437.42/43/46 with CODE A30 (Tire pressure control system (tire control))

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.15 Dæktryk og dæktrykskontrol — Serie 405 (modeller 05*, 09*, 10*, 11*, 12*, 20*, 22*) · Serie 437 (modeller 42*, 43*, 46*)

EinPAS 26 Aktive sikkerhedssystemer › 26.29 dæktryksovervågning/dæktryksregulering › 26.29.1 Grundinformation — Serie 405 (modeller 05*, 09*, 10*, 11*, 12*, 20*, 22*) · Serie 437 (modeller 42*, 43*, 46*)

AR40.15-G-0410B

Remove/install radial shaft sealing rings of tire pressure control system

28.07.2014

MODEL

405.05/09/10/11/12/20/22

with CODE A30 (Tire pressure control system (tire control))

MODEL

437.42/43/46

with CODE A30 (Tire pressure control system (tire control))

Remove/install radial shaft sealing rings of tire pressure control system

1

Sleeve

2

Retaining ring

3

Radial shaft sealing ring

4

Radial shaft sealing ring

Pfeil

Graphite coating

G40.16-3172-74

Remove/install

1

Remove sleeve (1) of tire pressure control system

AR40.15-G-0400B

2

Remove retaining ring (2)

3

Remove radial shaft sealing ring (3)

Installation: Observe installation position, see figure.

4

Remove radial shaft sealing ring (4)

Installation:
The radial shaft sealing ring (4) with graphite coating (arrow) must be installed first.
Leaks may occur otherwise.

Installation: Observe installation position, see figure.

5

Install in the reverse order

Henviste dokumenter