Checking procedure |
5 | Rim |
6 | Anti-theft wheel nut |
Y40.10-0005-01
Checking procedure
1 | Remove wheel tyre from rim. |
Check the rim for external damage or accidental damage. Replace the rim if necessary. |
2 | Install rim (5) to the wheel run out machine and securely tighten the anti-theft wheel nut (6). |
Fully tighten the rim on the machine. |
If rim is loose, |
|
cause inappropriate run out. |
rim run out checking procedure |
5 | Rim |
7 | Dial indicator with magnetic stand |
8 | Dial indicator |
Y40.10-0006-06
rim run out checking procedure
3 | Fix the dial indicator with magnetic stand (7) on the machine column. |
Set zero on the dial indicator (8). |
4 | Rotate the rim (5) manually and check the center run out on the rim. |
Check the rim run out as per the standard limit value, refer the rim run out chart. |
If the rim run out is more than standard limit value, |
|
the rim must replaced. |
Rim face out checking procedure |
5 | Rim |
7 | Dial indicator with magnetic stand |
8 | Dial indicator |
Y40.10-0007-06
Rim face out checking procedure
5 | Fix the dial indicator with magnetic stand (7) on the machine column. |
6 | Change the dial indicator position to the side of the rim (5). |
Set zero on the dial indicator (8). |
7 | Rotate the rim (5) manually and check the side run out from the rim. |
Check the rim run out as per the standard limit value, refer the rim run out chart. |
If the rim run out is more than standard limit value, |
|
the rim must replaced. |
8 | Detach the dial indicator with magnetic stand from the machine. |
9 | Remove the anti-theft wheel nut and detach the rim from machine. |