ar4010p1080cw

Draining TIREFIT sealant out of tires

Type ar · emne 40.10 · version 0102 · 2012-11-05

Gælder for: MODEL 204 without CODE 669 (Spare tire on steel rim) without CODE 690 (Collapsible spare wheel)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.10 Hjul, dæk — Serie 204

EinPAS 20 Undervogn › 20.30 Hjul/dæk › 20.30.30 Hjul/dæk/reservehjul — Serie 204

EinPAS 20 Undervogn › 20.30 Hjul/dæk › 20.30.35 påfyldningskompressor/reparationssæt — Serie 204

AR40.10-P-1080CW

Draining TIREFIT sealant out of tires

23.10.12

MODEL

204

without CODE 669 (Spare tire on steel rim)

without CODE 690 (Collapsible spare wheel)

Draining TIREFIT sealant out of tires

1

Tire sealant container

2

Hose

3

TIREFIT tire sealant

P40.10-3420-02

Lowering

Danger !

Risk of poisoning caused by swallowing the TIREFIT emulsion. Risk of injury caused by skin contact and eye contact with the TIREFIT emulsion. Risk of fire caused by ignition of the TIREFIT emulsion

Do not swallow or come into contact with the TIREFIT tire sealant, which is an emulsion of rubber and terpene phenolic resin. No open fire or open light sources.

AS40.10-Z-0001-01A

1

Remove wheel

AP40.10-P-4050CW

2

Put tire down with valve facing upwards

TIREFIT tire sealant

AH40.10-P-0001-01A

This is to prevent tire sealant (3) spraying out when unscrewing the valve element.

3

Remove valve element from valve and release pressure from the wheel

4.1

Unscrew union nut of the valve body and press the valve body into the wheel

Vehicles with code 470 Tire pressure monitor

4.2

Pull valve out of the disk wheel

Vehicles without tire pressure monitor


Carefully pull valve out of disk wheel.
Otherwise the surface of the disk wheels may be damaged.

Push the valve debris remaining in the valve bore of the disk wheel into the inside of the wheel.

5

Wheel with valve bore pointing downwards upright for 10 minutes and put down raised slightly

To ease extraction of the tire sealant (3).

6

Attach hose (2) to empty tire sealant container (1)

Replace the original hose of the tire sealant container (1) by a 400 mm long hose (2).

7

Compress the tire sealant container (1) and insert hose (2) through the valve bore of the disk wheel into the tire sealant (3)

8

Reduce pressure on the tire sealant container (1) and suction off tire sealant (3)

Position tire sealant container (1) under the wheel in order to make it easier to suction off the tire sealant (3). Approx. 90 % of the tire sealant (3) can be removed.

9

Bore the tire tread with a twist drill bit (10 mm dia.) and allow tire sealant (3) to flow off into a suitable container

If an empty tire sealant container (1) is not available.

Clean

10

Clean disk wheel

Remove tire sealant residue (3) using a damp cloth.

11

Replace tires

AR40.10-P-1030CW

12

Place new tire repair kit (3) into the vehicle

AP40.10-P-4054R

Henviste dokumenter