Balancing wheels

AR40.10-P-1040GZ

Balancing wheels

17.9.04

Balancing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A



Information on tires / rims

AH40.10-P-9411-01A

1

Remove balance weight with retaining clamp 43a)

 If there are several balance weights with retaining clamp, all of them should be removed.

 Mounting tool

*124589176300

2

Remove self-adhesive balance weight (43b, 43c)

 If there are several self-adhesive balance weights, all of them should be removed.

 Mounting tool

*124589176300

3.1

Clean disk wheel

 If necessary.

4.1

Mounting centering sleeve

When the centering sleeve is not already mounted.

AR40.10-P-1040-01A

Centering sleeve DUO-FLEX 2

*WH58.30-Z-1002-18A

Conversion kit

*WH58.30-Z-1003-18A

5

Fasten disk wheel on steady-state balancing machine

 Observe information provided by balancing machine manufacturer.

6

Balance disk wheel

 Observe information provided by balancing machine manufacturer.

 The disk wheel may only feature a maximum of 5 g residual imbalance.

7

Detach disk wheel from the steady-state balancing machine

8.1

Balance the other disk wheels as per the same procedure

 If necessary.

Number

Designation

WH58.30-Z-1002-18A

Centering sleeve

WH58.30-Z-1003-18A

Conversion kit