ar3550w046001nt
Adjust bracket for lift bellows of additional axle
Type ar · emne 35.50 · version 0100 · 2017-06-13
Gælder for: Rear axle 749.166 in model 967.067
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.50 Ekstra aksler (forløbs-/efterløbs-/midter-/anhængeraksel) — Serie 967 (modeller 067)
EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.52 Aksellift — Serie 967 (modeller 067)
Gælder også for motorer/gearkasser: 749 166
AR35.50-W-0460-01NT
| Adjust bracket for lift bellows of additional axle
|
|
|
Rear axle
| 749.166 in model 967.067
|
Number
| Designation
|
|
| Rear axle 749.166 in model 967.067
|
BE35.50-N-1001-02T
| Distance "B" between bracket and axle at bottom (trailing axle completely lowered)
| without load and without body
| mm
| 25...35
|
|
|
| without load and with body
| mm
| 35...45
|
Number
| Designation
|
| Rear axle 749.166 in model 967.067
|
BE35.50-N-1002-02T
| Thread protrusion "A" at top of bracket
| mm
| 10
|
Number
| Designation
|
| Rear axle 749.166 in model 967.067
|
BA35.50-N-1001-03T
| Nut, top bracket to lift bellows cross member
| Nm
| 620
|
Perform checks and adjustments on unloaded vehicles only. The vehicle must be on a level surface. The lift bellows (5) must be completely deflated.
1
| Check distance (B) between bracket (1) and axle (2) at bottom and adjust, if necessary.
|
|
| Adjust distance (B) through changing installation position of nuts (3, 4). The distance (B) must be identical at both brackets (1).
|
3
| Check thread protrusion (A) on bracket (1) at top and reduce the thread protrusion, if necessary.
|
