ar3550w040003a

Installing needle roller bearing at bottom of steering knuckle

Type ar · emne 35.50 · version 0100 · 2006-03-21

Gælder for: REAR AXLE 749.109 /110

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.50 Ekstra aksler (forløbs-/efterløbs-/midter-/anhængeraksel)

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.42 hjulholder/akselspindel/hjulnav/hjulleje

Gælder også for motorer/gearkasser: 749 109, 749 110

AR35.50-W-0400-03A

Installing needle roller bearing at bottom of steering knuckle

Test and adjustment values for trailing axle

Number

Designation

Rear axle 749.109/110

BE35.50-N-1001-02D

Distance from lower needle bearing to underside of steering knuckle

mm

18

Installing needle roller bearing at bottom of steering knuckle

389 589 00 63 00

Thrust piece

Installing needle roller bearing at bottom of steering knuckle

W33.25-0005-01

The needle roller bearings installed on the steering knuckles of a vehicle must each have the same part number.

When pressing in needle roller bearings, always place press-in drift on inscribed (hardened) side (arrows).

Installing needle roller bearing at bottom of steering knuckle

W33.25-0004-02

1 Press lower needle roller bearing (2) into steering knuckle using thrust piece (1), making sure that specified distance (A) from lower needle roller bearing (2) to underside of steering knuckle is observed.