1 | Pressure reservoir |
2 | High-pressure hose (from hydraulic unit (5) to pressure reservoir (1)) |
3 | High-pressure hose (from pressure reservoir (1) to shock absorber (6) at right) |
4 | High-pressure hose (from pressure reservoir (1) to shock absorber at left) |
W35.50-1122-06
2 | High-pressure hose (from hydraulic unit (5) to pressure reservoir (1)) |
5 | Hydraulic unit |
W35.50-1123-06
Shown on right shock absorber |
3 | High-pressure hose (from pressure reservoir (1) to shock absorber (6) at right) |
6 | Shock absorber |
W32.25-1027-06
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Check | ||
1 | Secure vehicle on rear axle using two chocks to prevent it from rolling away. | ||
2 | Start engine and raise leading axle. | Keep engine running as the leading axle is lowered when the engine is stopped and the ignition switched off, so the system is no longer pressurized. | |
3 | Check high-pressure hoses (2, 3, 4) for leak tightness. | ||
Perform a visual check only as to whether oil leaks out from the high-pressure hoses (2, 3, 4). | |||
If the high-pressure hoses (2, 3, 4) are leaky, | |||
| |||
replace high-pressure hoses (2, 3, 4). | |||
4 | Stop the engine and switch off the ignition. | The leading axle is lowered when the engine is stopped and the ignition switched off. | |
5 | Remove cap from hydraulic unit (5). | ||
6 | Check component parts of hydraulic unit (5) for leak tightness. | Perform a visual check only as to whether oil leaks out at the component parts of the hydraulic unit (5). | |
If the component parts of the hydraulic unit (5) are leaky, | |||
| |||
replace hydraulic unit (5). | |||
7 | Mount cap onto hydraulic unit (5). | ||
8 | Remove wheel chocks from rear axle. |
Henviste dokumenter
- ar3550w011501h
- ar3550w0120h
- ar3550w0121h
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001301a Fare for kvæstelser på hud og øjne på grund af sprøjtende hydraulikvæske, som erunder højt tryk. Forgiftningsfare ved indtagelse af hydralikvæske