ar3550w0105a

Removing, installing lift and lower solenoid valves

Type ar · emne 35.50 · version 0101 · 2012-02-21

Gælder for: REAR AXLE 749.011 Twin-tired trailing axle (Nummek)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.50 Ekstra aksler (forløbs-/efterløbs-/midter-/anhængeraksel)

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.13 ledning/slange/ventil

Gælder også for motorer/gearkasser: 749 011

AR35.50-W-0105A

Removing, installing lift and lower solenoid valves

15.2.12

REAR AXLE 749.011
Twin-tired trailing axle (Nummek)

Removing, installing lift and lower solenoid valves

W35.50-1048-11

1 Valve block

2 O-ring

3 Lift solenoid valve

4 Cap

5 Connector (lift)

6 Connector (lower)

7 Lower solenoid valve

Removing, installing

1

Lower trailing axle

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground lead from battery

3

Remove cover of hydraulics box

4

Disconnect connectors (5 and 6) at solenoid valves (3 and 7)

Unlock and unplug.

5

Remove caps (4) at solenoid valves (3 and 7)

6

Screw solenoid valves (3 and 7) out of valve block (1)

Installation: Use new O-ring (2).

7

Install in the reverse order

Henviste dokumenter