648 589 01 63 00
Thrust piece
Puller
000 589 45 33 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1092-02A | Adhesive kit, body, 2-component adhesive | A 009 989 36 71 |
W35.50-1043-01
1 Remove outer races (1 and 4) using a suitable drift, remove intermediate sleeve (3).
2 Press in new outside outer race (4) up to dimension A.
Dimension A = 10 mm.
3 Insert intermediate sleeve (3) into rocker arm and press in new inside outer race (1) all the way until the stop.
W35.50-1044-01
4 Pull off thrust ring together with inner tapered roller bearing (5) using puller.
W35.50-1045-01
5 Coat seat surface of thrust ring on swing axle (7) with sealant and push on new thrust ring (6).
The bevel (arrow) faces outwards.
6 Heat new tapered roller bearing (5) to approx. 80 °C and push onto swing axle (7).