ar3550b359301a
Adjust lift bellow bracket during repair and maintenance
Type ar · emne 35.50 · version 0100 · 2018-03-15
Gælder for: Rear axle 749.117 Rear axle 749.118
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.50 Ekstra aksler (forløbs-/efterløbs-/midter-/anhængeraksel)
EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.52 Aksellift
Gælder også for motorer/gearkasser: 749 117, 749 118
AR35.50-B-3593-01A
| Adjust lift bellow bracket during repair and maintenance
|
|
|
Rear axle
| 749.117
|
Rear axle
| 749.118
|
Measurement of the clearance between the clamp and the auxiliary shaft
|
Number
| Designation
|
|
| Rear axle 749.117/118
|
BE35.50-B-1001-04A
| Adjustment measure between the bellows arch and the auxiliary shaft
| Vehicle empty without load
| mm
| 20
|
|
|
| Vehicle without body
| mm
| 10
|
Fixture of the auxiliary shaft hanger
|
Number
| Designation
|
|
| Rear axle 749.117/118
|
BA35.50-B-1001-04A
| Upper nut for locking the bellows arch
| M22x1.5
| Nm
| 260 ... 300
|
Measure
1
| Measure the clearance between the auxiliary axle and the bracket for lift bellows. .
|
Remove
2
| Remove the screws that fasten the bracket for lift bellows.
|
|
| In case the nuts, or any other component, are damaged:
|
|
| Replace the damaged components.
|
Adjust
3
| Adjust the clearance. .
|
|
| Use the lower adjustment screws.
|
Install
4
| Install the fastening screws.
|
|
| Do not exceed the prescribed torque.
|