Mechanically lock/unlock differential

Type ar · emne 35.40 · version 0104 · 2018-10-23

Gælder for: Rear axle 742.5 in model 967 Rear axle 746.30 in model 956 Rear axle 746.30 in model 963, 964 Rear axle 746.305 in model 930, 934 Rear axle 748.28 in model 956 Rear axle 748.28/29 in model 963, 964 Rear axle 748.59 in model 963, 964 Rear axle 770.00 in model 967 Rear axle 771.00/11/12 in model 967 Rear axle 771.01 in model 963, 964

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.40 Differentialespærringer — Serie 930 · Serie 934 · Serie 956 · Serie 963 · Serie 964 · Serie 967

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 930 · Serie 934 · Serie 956 · Serie 963 · Serie 964 · Serie 967

Gælder også for motorer/gearkasser: 742 5**, 746 30*, 746 305, 748 28*, 748 29*, 748 59*, 770 00*, 771 00*, 771 01*, 771 11*, 771 12*

AR35.40-W-0701A

Mechanically lock/unlock differential

23.10.2018

Rear axle	742.5 in model 967
Rear axle	746.30 in model 956
Rear axle	746.30 in model 963, 964
Rear axle	746.305 in model 930, 934
Rear axle	748.28 in model 956
Rear axle	748.28/29 in model 963, 964
Rear axle	748.59 in model 963, 964
Rear axle	770.00 in model 967
Rear axle	771.00/11/12 in model 967
Rear axle	771.01 in model 963, 964

Shown on rear axle 746.301

1	Sealing ring
2	Bolt (M181.5)
3	Indicator switch (for differential lock)
4	Cover for shift cylinder (for differential lock)

W35.40-1051-01

W35.40-1052-01

	Lock
1	Disconnect electrical connector from indicator switch (3)
2	Remove indicator switch (3)	 Installation: Install new sealing ring (1).
3	Screw bolt (2) into shift cylinder cover (4)	 The differential lock is mechanically engaged through the bolt (2). The differential is mechanically blocked if, when a wheel is turning, the opposite wheel also starts to turn in the same direction.
4	Release in the reverse order