Mechanically locking differential lock

Type ar · emne 35.40 · version 0102 · 2013-02-05

Gælder for: REAR AXLE 746.30 in MODEL 963, 964 REAR AXLE 748.28/29 in MODEL 963, 964 REAR AXLE 748.595 in MODEL 963, 964 REAR AXLE 771.01 in MODEL 963, 964

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.40 Differentialespærringer — Serie 963 · Serie 964

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 963 · Serie 964

Gælder også for motorer/gearkasser: 746 30*, 748 28*, 748 29*, 748 595, 771 01*

AR35.40-W-0700D

Mechanically locking differential lock

16.01.2013

REAR AXLE	746.30 in MODEL 963, 964
REAR AXLE	748.28/29 in MODEL 963, 964
REAR AXLE	748.595 in MODEL 963, 964
REAR AXLE	771.01 in MODEL 963, 964

Shown on rear axle 746.301

1	Sealing ring
2	Bolt (M181.5)
S12	1st rear axle differential lock indicator switch

W35.40-1051-01

W35.40-1052-01

	Lock
1	Disconnect electrical connector from 1st rear axle differential lock indicator switch (S12)
2	Remove 1st rear axle differential lock indicator switch (S12)	 Installation: Install new sealing ring (1).
3	Screw bolt (2) into cover of differential lock until differential lock is locked	 Raise the vehicle axle and check the locking function by rotating a wheel or a wheel hub.
4	Release in the reverse order