ar3540p913102f

Install and adjust differential lock shift cylinder

Type ar · emne 35.40 · version 0109 · 2017-10-03

Gælder for: Model 460 Model 461 (except 461.331) Model 463 (except 463.270/271) up to model year 2013

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.40 Differentialespærringer — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.38 Gearskifte — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR35.40-P-9131-02F

Install and adjust differential lock shift cylinder

Model

460

Model

461 (except 461.331)

Model

463 (except 463.270/271)

up to model year 2013

Differential lock shift cylinder

Number

Designation

Model 460, 461
Model 463
up to model year 2019

Model 463
as of model year 2019

BA35.40-P-1001-01A

Bolt, shift cylinder to axle tube

Nm

25

-

Install and adjust differential lock shift cylinder

1

Mount shift cylinder with new seal on the axle tube and screw in mounting bolts.


The gearshift lever must engage in the mounting hole of the gearshift tube. Do not tighten mounting bolts, it must still be possible to move the shift cylinder.



2

Move shift cylinder to the applied position using hydraulic or pneumatic pressure.



3

Move shift cylinder towards the differential (arrow) until the dog clutch's stop is reached. In doing so turn the axle shafts, until the differential lock noticeably latches into place.


Only move the shift cylinder so that the inner spring is not clamped. The shift cylinder must not move back when released.


D35.40-0007-01

4

Tighten mounting screws of the shift cylinder in this position  .

5

Remove the hydraulic or pneumatic pressure applied in step 2 from the shift cylinder.

6

By rotating the axle shafts, check whether the differential lock has disengaged.

The differential lock must be unlocked.