ar3540b065001a
Check/adjust axial play of interwheel differential lock
Type ar · emne 35.40 · version 0100 · 2016-11-12
Gælder for: Rear axle 748.590/594 in model 934.2, 958.4
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.40 Differentialespærringer — Serie 934 (modeller 2**) · Serie 958 (modeller 4**)
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.38 Gearskifte — Serie 934 (modeller 2**) · Serie 958 (modeller 4**)
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 934 (modeller 2**) · Serie 958 (modeller 4**)
Gælder også for motorer/gearkasser: 748 590, 748 594
AR35.40-B-0650-01A
| Check/adjust axial play of interwheel differential lock
|
|
|
Rear axle
| 748.590/594 in model 934.2, 958.4
|
Number
| Designation
|
| Rear axles 748.590/594
|
BE35.40-B-1001-02B
| Axial clearance of the crosswise blocking engagement bushing
| mm
| 1,5...2,0
|
1
| With the differential lock mechanism actuated, put the centering pin (7) in the gear sleeve (2).
|
2
| Measure the dimension “A” between the gear sleeve (2) and the gear (8) with a feeler gauge.
|
|
| Measure at 03 different points the region between the gear sleeve (2) and the gear (8).
|
|
| If the measured distance is not as specified, adjust the axial play of the gear sleeve (2).
|
Adjust
3
| Remove again the stub axle (6) and the spring (4) and install again the respective compensation washer (5).
|
|
| Reduce the axial play: install a thicker compensating washer (5).
Increase the axial play: install a thicker compensating washer (5).
|
