Pressing ABS gear onto drive pinion

Type ar · emne 35.31 · version 0105 · 1998-10-30

Gælder for: Rear axle center assembly dia. 168 in MODEL 124, 170, 201, 202 with CODE (470a) Anti-lock brake system (ABS) Rear axle center assembly dia. 185 in MODEL 124, 129, 201, 202, 208 with CODE (470a) Anti-lock brake system (ABS) Rear axle center assembly dia. 210 in MODEL 124, 129, 140 with CODE (470a) Anti-lock brake system (ABS)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.31 Bagakselmidtersamling — Serie 124 · Serie 129 · Serie 140 · Serie 170 · Serie 201 · Serie 202 · Serie 208

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 124 · Serie 129 · Serie 140 · Serie 170 · Serie 201 · Serie 202 · Serie 208

AR35.31-P-0550-31B	Pressing ABS gear onto drive pinion
	Press-on sleeve for ABS gear		WF58.50-P-3531-04B
		Number of teeth on ABS gear: 
		Characteristics, installation survey for rear axle center assemblies with 168 mm dia. crown wheel	GF35.31-P-1000-01B
		Characteristics, installation survey for rear axle center assemblies with 185 mm dia. crown wheel	GF35.31-P-1000-01C
		Characteristics, installation survey for rear axle center assemblies with 210 mm dia. ring gear	GF35.31-P-1000-01D

P35.31-0363-01

Press ABS gear (49) with shop-made spacer sleeve (013) onto drive pinion (47).



The number of teeth on the ABS gear (49) must correspond with the rear axle ratio.

Pressing ABS gear onto drive pinion

Henviste dokumenter