ar3531p055026b

Fitting spacer sleeve with bearing washers on both sides onto drive pinion

Type ar · emne 35.31 · version 0109 · 2009-02-16

Gælder for: Rear axle center assembly dia. 168 in MODEL 124, 170, 201, 202, 210 Rear axle center assembly dia. 185 in MODEL 124, 129, 170, 201, 202, 208, 210 Rear axle center assembly dia. 210 in MODEL 124, 129, 140, 210

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.31 Bagakselmidtersamling — Serie 124 · Serie 129 · Serie 140 · Serie 170 · Serie 201 · Serie 202 · Serie 208 · Serie 210

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 124 · Serie 129 · Serie 140 · Serie 170 · Serie 201 · Serie 202 · Serie 208 · Serie 210

AR35.31-P-0550-26B

Fitting spacer sleeve with bearing washers on both sides onto drive pinion

Fitting spacer sleeve with bearing washers on both sides onto drive pinion

P35.31-0369-01

1 Enclose one contact washer (48) each on both sides of the spacer washer (44) and push onto the drive pinion.

The spacer sleeve (44) and shims (48) must always be replaced.

44 Spacer sleeve

48 Bearing washer

49 ABS gear