ar3531p055010c

Removing tapered roller bearing inner race from drive pinion

Type ar · emne 35.31 · version 0108 · 2009-02-17

Gælder for: Rear axle center assembly dia. 185 in MODEL 124.003 /004 /007 /019 /022 /023 /026 /027 /030 /040 /042 /043 /050 /060 /062 /079 /082 /083 /090, 124.104 /107 as of 1.5.94, 124.127 /128 /129 /130 /131 /133 /188 /190 /191 /193 /226 /230 /290 /330 /333 /393, 129.060, 170.444 /445 /447 /449, 201.028 /029 /035 /036 /128, 202.020 /022 /023 /024 /025 /026 /028 /029 /080 /082 /081 /083 /086 /087 /088 /089 /128 /188, 208.335 /344 /345 /347 /348 /435 /444 /445 /447 /448, 210.010 /020 /035 /037 /048 /061 /062 /210

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.31 Bagakselmidtersamling — Serie 124 (modeller 003, 004, 007, 008, 019, 020, 021, 022, 023, 026, 027, 028, 029, 030, 031, 032, 034, 036, 040, 042, 043, 050, 051, 052, 060, 061, 062, 066, 079, 080, 081, 082, 083, 088, 090, 091, 092, 104, 107, 120, 125, 126, 127, 128, 129, 130, 131, 133, 180, 185, 186, 188, 190, 191, 193, 226, 230, 290, 330, 333, 393) · Serie 129 (modeller 058, 060, 061, 063, 066) · Serie 140 (modeller 028, 032, 033, 042, 043, 063, 1**) · Serie 170 (modeller 444, 445, 447, 449) · Serie 201 (modeller 018, 023, 024, 028, 029, 035, 036, 122, 126, 128) · Serie 202 (modeller 018, 020, 022, 023, 024, 025, 026, 028, 029, 078, 080, 081, 082, 083, 085, 086, 087, 088, 089, 120, 121, 122, 125, 128, 134, 182, 188, 194) · Serie 208 (modeller 335, 344, 345, 347, 348, 435, 444, 445, 447, 448) · Serie 210 (modeller 003, 004, 007, 010, 020, 035, 037, 048, 061, 062, 070, 072, 074, 210, 235, 237, 248, 261, 262, 270, 272, 274, 610, 617)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 124 (modeller 003, 004, 007, 008, 019, 020, 021, 022, 023, 026, 027, 028, 029, 030, 031, 032, 034, 036, 040, 042, 043, 050, 051, 052, 060, 061, 062, 066, 079, 080, 081, 082, 083, 088, 090, 091, 092, 104, 107, 120, 125, 126, 127, 128, 129, 130, 131, 133, 180, 185, 186, 188, 190, 191, 193, 226, 230, 290, 330, 333, 393) · Serie 129 (modeller 058, 060, 061, 063, 066) · Serie 140 (modeller 028, 032, 033, 042, 043, 063, 1**) · Serie 170 (modeller 444, 445, 447, 449) · Serie 201 (modeller 018, 023, 024, 028, 029, 035, 036, 122, 126, 128) · Serie 202 (modeller 018, 020, 022, 023, 024, 025, 026, 028, 029, 078, 080, 081, 082, 083, 085, 086, 087, 088, 089, 120, 121, 122, 125, 128, 134, 182, 188, 194) · Serie 208 (modeller 335, 344, 345, 347, 348, 435, 444, 445, 447, 448) · Serie 210 (modeller 003, 004, 007, 010, 020, 035, 037, 048, 061, 062, 070, 072, 074, 210, 235, 237, 248, 261, 262, 270, 272, 274, 610, 617)

Gælder også for motorer/gearkasser: 722 ***

AR35.31-P-0550-10C

Removing tapered roller bearing inner race from drive pinion

Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion
Removing tapered roller bearing inner race from drive pinion

000 589 34 34 00

140 589 00 01 00

001 589 50 33 00

000 589 63 34 00

Chuck

Extension

Puller

Open end wrench

Removing tapered roller bearing inner race from drive pinion

P35.31-0258-01

1 Assemble puller (024) with extension (024c) and clamping pliers (024a) and tighten.

If necessary, use an open end wrench to fit and remove the extension (024c).

Removing tapered roller bearing inner race from drive pinion

P35.31-0259-01

2 Slide puller (024) with clamping pliers (024a) over tapered roller bearing inner race and clamp securely behind rollers (arrow) using spring pin (024b).

3 Using puller (024), detach tapered roller bearing inner race from drive pinion (47) and remove