Removal and installation of radial seal ring on side of rear axle housing

Type ar · emne 35.31 · version 0106 · 1999-03-11

Gælder for: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Ikke tilgængelig på “da”; vises på Engelsk.

AR35.31-P-0540-05E	Removal and installation of radial seal ring on side of rear axle housing	 Replace radial seal ring and smear sealing lip with Universal hypoid gear oil: 
		Universal Hypoid gear oils (SAE 85 W-90)	BB00.40-P-0235-07A
	Radial seal rings modified	Models 124, 201	BT35.31-P-0008-01A

Removal and installation of radial seal ring on side of rear axle housing

201 589 03 15 00

Drift

P35.31-0232-01

Pressing off

1 Press radial seal ring (32) out of housing using a suitable screwdriver.

P35.31-0233-01

Pressing in

2 Smear sealing lip of new radial seal ring (32) with Universal hypoid gear oil.

3 Press in radial seal ring (32) using drift (049b).

Removal and installation of radial seal ring on side of rear axle housing

Henviste dokumenter