AR35.31-P-0520-06I | Drain oil from rear axle differential | ||
| Oil filler/drain screw on rear axle differential modified | up to 18.1.04 |
Rear axle center assembly housing
Rear axle center assembly housing
Number | Designation | Model | Model | |||
BA35.31-P-1003-02A | Oil drain screw, rear axle differential | Nm | 50 | 50 | ||
Rear axle center assembly housing
Number | Designation | Model | Model | |||
BA35.31-P-1003-02A | Oil drain screw, rear axle differential | Nm | 50 | 50 | ||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1061-01A | Sealant, Omnifit 100H (50 g) | A 002 989 23 71 |
BR00.45-Z-1046-04A | Cleaning spray, Loctite 7063 (150ml) | A 001 986 71 71 10 |
P35.31-2007-02
1 Clean area around oil drain screw (50h).
2 Remove oil drain screw (50h).
Replace oil drain screw (50h).
Shown on rear axle differential dia. 198 mm
50g Oil filler plug
50h Oil drain screw
P35.31-2158-01
3 Clean the new oil drain screw (50h) and the threaded hole in the rear axle differential with Loctite 7063 cleaning spray.
The oil drain screw (50h) and tapped hole must be free of oil and grease.
4 Apply about a drop of Omnifit sealing compound 100H on the second or third lower thread of the oil drain screw (50h).
5 Screw oil drain screw (50h) immediately into the rear axle differential and tighten with specified torque .