ar3531d053006s
Pressing out and pressing in radial sealing ring at drive pinion
Type ar · emne 35.31 · version 0101 · 2015-05-23
Gælder for: Rear axle 741.421/422/423/453/454/455 in model 906 Rear axle 741.421/455 in model 900
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.31 Bagakselmidtersamling — Serie 900 · Serie 906
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 900 · Serie 906
Gælder også for motorer/gearkasser: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455
AR35.31-D-0530-06S
| Pressing out and pressing in radial sealing ring at drive pinion
|
|
|
Rear axle
| 741.421/422/423/453/454/455 in model 906
|
Rear axle
| 741.421/455 in model 900
|
1
| Use suitable tool to pry radial shaft sealing ring out of rear axle housing (1).
|
|
| Do not damage sealing surfaces of mounting hole.
Otherwise leakage may occur.
|
3
| Insert new radial shaft sealing ring into drift (02), set at right angle to mounting hole and drive in flush using drift (02).
|
|
| Use new radial shaft sealing ring.
Otherwise leakage may occur.
|
|
| The mounting depth is specified by the drift (02).
|
