ar3530t045912aa
Determine the thickness of the compensating ring on the drive pinion gear
Type ar · emne 35.30 · version 0103 · 2006-07-26
Gælder for: REAR AXLE 748.120 /121 /122 /123 /124 /125 /126 /134 /135
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring
Gælder også for motorer/gearkasser: 748 120, 748 121, 748 122, 748 123, 748 124, 748 125, 748 134, 748 135
AR35.30-T-0459-12AA
| Determine the thickness of the compensating ring on the drive pinion gear
|
|
|
Commercially available tools
Number
| Designation
|
|
WH58.30-Z-1002-12A
| Micrometer
|
|
WH58.30-Z-1030-12A
| Measuring ring,
Firma Zahnradfabrik Passau GmbH D-94034 Passau
|
|
1 Using a micrometer gauge measure the dimension (X) between the end faces of the pin and measuring ring
The dimension (X) corresponds to the thickness of the compensating ring to be installed.
