ar3530t045902b

Removing and installing drive pinion head bearing

Type ar · emne 35.30 · version 0100 · 2005-07-12

Gælder for: REAR AXLE 745.990 /996 /997 in MODEL 613

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 613

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 613

Gælder også for motorer/gearkasser: 745 990, 745 996, 745 997

AR35.30-T-0459-02B

Removing and installing drive pinion head bearing

Removing and installing drive pinion head bearing

Drift

389 589 02 15 00

Removing and installing drive pinion head bearing

T35.30-0026-01

Removing

1 Rotate circlip (1) in direction of arrow and remove.

2 Remove cylindrical roller bearing (2) from rear axle housing.

Removing and installing drive pinion head bearing

T35.30-0027-01

Installing

3 Drive cylindrical roller bearing into rear axle housing using drift.

Groove in cylindrical roller bearing and groove in rear axle housing must be in alignment!

4 Install circlip.