Carry out concentricity measurement on the drive flange

AR35.30-S-4671-02P

Carry out concentricity measurement on the drive flange

Model

470, 471

Axle drive

Number

Designation

Model 470, 471

BE35.30-N-1003-07P

Axial runout on drive flange

mm

< 0,08

1

 Fasten  dial indicator (1) with   dial indicator holder at vehicle floor.

2

 Align dial indicator (1) relative to concentricity measurement on measurement track (3) in 90° angle to drive flange (2).

3

Rotate drive flange (2) slowly at constant speed through 360° and read off measurement value.

If the measurement value is out of tolerance



Replace drive flange (2).

4

 Align dial indicator (1) relative to concentricity measurement on measurement track (4) in 90° angle to drive flange (2).

5

Rotate drive flange (2) slowly at constant speed through 360° and read off measurement value.

If the measurement value is out of tolerance



Replace drive flange (2).

6

 Remove dial indicator (1) with   dial indicator holder from vehicle floor.

Shown on model 470 with engine 699