ar3530p4670f

Remove/install radial seal at drive pinion gear

Type ar · emne 35.30 · version 0115 · 2017-08-02

Gælder for: Model 460 Model 461 (except 461.331) Model 463 (except 463.270/271) up to model year 2013

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR35.30-P-4670F

Remove/install radial seal at drive pinion gear

21.07.2017

Model

460

Model

461 (except 461.331)

Model

463 (except 463.270/271)

up to model year 2013

Remove/install radial seal at drive pinion gear
Remove/install radial seal at drive pinion gear

Shown on MODEL 463

1

Spacer washer

2

Ring

3

Oil retainer

4

Compressed ring

5

O-ring

6

Inner radial sealing ring

7

Outer radial sealing ring

8

Nut

9

Flange

P33.30-0362-01

P33.30-0352-01

Remove

1

Remove flange (9) from drive pinion


Model 460
Model 461 (except 461.331)
Model 463 (except 463.270/271)
up to model year 2013/face lift 2012

AR35.30-P-0472F

2

Remove outer radial sealing ring (7) and inner radial sealing ring (6)

3

Remove O-ring (5)

Install

4

Install O-ring (5)

Replace O-ring (5).

5

Install inner radial sealing ring (6) and outer radial sealing ring (7)

Pound in inner radial sealing ring (6) with washer of special tool engaged.
Pound in outer radial sealing ring (7) without washer of special tool engaged.

Coat outer edge of radial sealing rings without outer rubber coating with sealant. Install radial sealing rings with outer rubber coating without sealant.

Pack the space between the dust lip and lip with grease, lubricate lip and garter spring lightly.

Sealant, Omnifit FD 3041

*BR00.45-Z-1012-01A

MB multipurpose grease, 400 g

*BR00.45-Z-1017-06A

Drift

*460589151500

6

Install flange (9) on drive pinion

Remove/install drive flange at drive pinion

AR35.30-P-0472F

Remove/install radial seal at drive pinion gear

460 589 15 15 00

Drift

Repair materials

Number

Designation

Order number

BR00.45-Z-1012-01A

Sealant, Omnifit FD 3041

A 002 989 47 20 10

BR00.45-Z-1017-06A

MB multipurpose grease, 400 g

A 001 989 34 51 11

Henviste dokumenter