ar3530p066004i

Caulk inner CV joint to rear-axle shaft

Type ar · emne 35.30 · version 0106 · 2005-04-20

Gælder for: MODEL 215, 220 as of 1.10.99, 230.474 up to 31.8.03 geschraubte Hinterachswellen

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 215 · Serie 220 · Serie 230 (modeller 474)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.51 Aksel/drivaksel — Serie 215 · Serie 220 · Serie 230 (modeller 474)

AR35.30-P-0660-04I

Caulk inner CV joint to rear-axle shaft

Shell halves (2 ea.) for pressing off and caulking the inner constant velocity joint.

WF58.50-P-3530-01A

Caulk inner CV joint to rear-axle shaft

P35.30-2026-01

1 Support inner constant velocity joint with the two shell halves (063a).

Caulk inner CV joint to rear-axle shaft

P35.30-2027-01

2 Apply caulking (arrows) using a suitable cross-cut chisel (approx. 5 mm wide), whereby the material must "flow" into the groove in the rear-axle shaft.

The caulking must be applied to the land at an offset of 120°. It must not be applied in the vicinity of the narrow ball raceway.

The caulking must be carried out such that the hub of the inner constant velocity joint can no longer be slid along the rear axle shaft.

Henviste dokumenter