ar3530p047503gh

Adjust gear backlash on differential assembly ring gear

Type ar · emne 35.30 · version 0108 · 2012-10-14

Gælder for: MODEL 463 (except 463.270/271) /facelift 2012

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR35.30-P-0475-03GH

Adjust gear backlash on differential assembly ring gear

MODEL	463 (except 463.270/271)
	/facelift 2012

Test values for ring gear with differential

Number	Designation		MODEL 460, 461, 463
BE35.30-P-1001-05A	Gear backlash	mm	0,1-0,15

Adjust gear backlash on differential assembly ring gear

001 589 53 21 00

Dial gage

363 589 02 21 00

Dial indicator holder

1	 Position dial indicator holder with  dial indicator on axle housing so that probe of  dial indicator is perpendicular to tooth flank.

2	Check the gear backlash by moving the ring gear to and fro.

 This procedure should be repeated on at least 4 positions on the circumference of the ring gear.

 The gear backlash is changed by replacing the shims between the axle housing and bearing. If a thinner shim is installed on one side, then a shim which is thicker to the same extent must be installed on the opposite side, in order to retain the bearing preload.

P33.30-0363-01