ar3530p011503a

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Type ar · emne 35.30 · version 0108 · 2004-08-19

Gælder for: MODEL 129, 140, 202, 210 up to 31.1.96

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 129 · Serie 140 · Serie 202 · Serie 210

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.51 Aksel/drivaksel — Serie 129 · Serie 140 · Serie 202 · Serie 210

AR35.30-P-0115-03A

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Extraction and installation tool

210 589 03 43 00

Pressing out and drawing in rear axle shaft at rear axle shaft flange

P35.30-0209-01

Removal:

1.1 Cut the thread M8 (models 129, 140, 202 as of 08/93, 210 with core hole bore).

Pressing out and drawing in rear axle shaft at rear axle shaft flange

P35.30-0210-01

2 Use removal and insertion tool to press firmly attached rear axle shaft out of the rear axle shaft flange.

Installation

On rear axle shafts which are glued in before installation clean the splined shaft profile and rear axle shaft flange mechanically.

3 Pull in rear axle shaft using the extraction and insertion tool .