ar3530d481509b

Install drive pinion with bearing in rear axle housing

Type ar · emne 35.30 · version 0104 · 2003-09-16

Gælder for: REAR AXLE 741.408 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7 REAR AXLE 741.130 in MODEL XD4, XD5, YD4, YD5 REAR AXLE 741.408 in MODEL 903.61 /62 /66 /67 with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA with CODE (ZU9) National version for Mexico REAR AXLE 741.130 in MODEL 904.61 /62 /66 with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA with CODE (ZU9) National version for Mexico

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 903 (modeller 61*, 62*, 66*, 67*) · Serie 904 (modeller 61*, 62*, 66*)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 903 (modeller 61*, 62*, 66*, 67*) · Serie 904 (modeller 61*, 62*, 66*)

Gælder også for motorer/gearkasser: 741 130, 741 408

AR35.30-D-4815-09B

Install drive pinion with bearing in rear axle housing

Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing

601 589 02 63 00

000 589 10 15 00

312 589 05 15 00

318 589 01 15 00

Support bridge

Drift

Drift

Drift

Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing

D35.30-0056-01

D35.30-0055-01

1 Install shim of calculated thickness in axle housing.

The chamfered side must face towards the coupling flange.

2 Drive in tapered roller bearing outer race of pinion-side bearing (1)

Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing

D35.30-0058-01

D35.30-0057-01

3 Drive in tapered roller bearing outer race of flange-side bearing
(2, ).

4 Insert drive pinion.

5 Screw device (3) onto axle housing and position spindle of on drive pinion.

Install drive pinion with bearing in rear axle housing
Install drive pinion with bearing in rear axle housing

D35.30-0060-01

D35.30-0059-01

6 Fit new compressed ring (6) on drive pinion.

7 Drive in outer tapered roller bearing (7, ).