ar3530d467202tsr

Install drive flange on drive pinion

Type ar · emne 35.30 · version 0100 · 2019-01-03

Gælder for: Rear axle 741.421/422/423/453/454/455/456 in model 907

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 907

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 907

Gælder også for motorer/gearkasser: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455, 741 456

AR35.30-D-4672-02TSR

Install drive flange on drive pinion

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Rear axle

741.421/422/423/453/454/455/456 in model 907

Rear axle shaft

Number

Designation

Rear axle 741.421/423

Rear axle 741.422/453/454/455/456

BA35.30-N-1005-01A

Nut, joint flange to drive pinion

200

200

Install drive flange on drive pinion

717 589 00 31 00

Retainer wrench

Install drive flange on drive pinion

1

Install new drive flange (1) onto drive pinion.


The drive flange (1) must be replaced.
Otherwise leakage may occur.



2

Mount retainer wrench (01) onto drive flange (1).



3

Screw on new collar nut (2) and tighten to torque   .



4

Remove retainer wrench (01) from drive flange (1).


P35.31-2254-06

Henviste dokumenter