ar3530d467003s
Install joint flange at drive pinion
Type ar · emne 35.30 · version 0102 · 2018-05-15
Gælder for: Rear axle 741.421/422/423/453/454/455 in model 906 Rear axle 741.421/455 in model 900
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 900 · Serie 906
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 900 · Serie 906
Gælder også for motorer/gearkasser: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455
AR35.30-D-4670-03S
| Install joint flange at drive pinion
|
|
|
Rear axle
| 741.421/422/423/453/454/455 in model 906
|
Rear axle
| 741.421/455 in model 900
|
Number
| Designation
|
| Rear axle 741.421/423
| Rear axle 741.422/453/454/455/456
|
BA35.30-N-1005-01A
| Nut, joint flange to drive pinion
|
| 200
| 200
|
1
| Mount new joint flange (1) onto drive pinion.
|
|
| The joint flange (1) must be replaced.
Otherwise leakage may occur.
|
2
| Mount retainer wrench (01) on joint flange (1).
|
3
| Screw on new collar nut (2) and tighten to specified torque .
|
4
| Detach retainer wrench (01) from joint flange (1).
|
