Install radial sealing ring on drive pinion

Type ar · emne 35.30 · version 0109 · 2009-10-23

Gælder for: REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55 REAR AXLE 741.130 in MODEL 690.6 REAR AXLE 741.408 /409 in MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 690 (modeller 6**)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 690 (modeller 6**)

Gælder også for motorer/gearkasser: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 43*, 741 52*, 741 530, 741 540, 741 55*

AR35.30-D-4670-02A

Install radial sealing ring on drive pinion

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-01A	SV flame starting system sealant replaced by: A001 989 25 20	A 000 989 54 20
BR00.45-Z-1008-06A	Silicone-based grease	A 001 989 28 51 10

Install radial sealing ring on drive pinion

460 589 15 15 00

Drift

D35.25-0007-01

1 Pack the space between the dust lip and sealing lip on the radial sealing ring with multipurpose grease.

2 With a sealing ring which is not lined with rubber, coat the outer circumference with sealant.

 Do not coat a sealing ring which is partially lined with rubber with sealant.

3 Using press-in drift (01) press in new radial sealing ring onto the end stop in the rear axle housing.

Illustration shows rear axle 741.408