ar3530d467001a

Remove joint flange at drive pinion

Type ar · emne 35.30 · version 0110 · 2011-07-18

Gælder for: REAR AXLE 741.130 /131 /40 /412 /413 /414 /415 /416 /420 /43 /52 /530 /540 /55 REAR AXLE 741.417 in MODEL 906.132 /134 /136 REAR AXLE 741.130 in MODEL 690.6 REAR AXLE 741.408 /409 in MODEL 690.6 REAR AXLE 741.428 in MODEL 8AC906.133 /631 /633 /635 with CODE (ZL3) National version for Latin America REAR AXLE 741.429 in MODEL 8AC906.153 /155 /655 /657 with CODE (ZL3) National version for Latin America

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 690 (modeller 6**) · Serie 906 (modeller 132, 133, 134, 136, 153, 155, 631, 633, 635, 655, 657)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 690 (modeller 6**) · Serie 906 (modeller 132, 133, 134, 136, 153, 155, 631, 633, 635, 655, 657)

Gælder også for motorer/gearkasser: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 412, 741 413, 741 414, 741 415, 741 416, 741 417, 741 420, 741 428, 741 429, 741 43*, 741 52*, 741 530, 741 540, 741 55*

AR35.30-D-4670-01A

Remove joint flange at drive pinion

717 589 00 31 00

035 589 01 33 00

Puller

Retainer wrench

D35.25-0010-01

1 Release collar nut.

2 Screw retainer wrench (01) onto joint flange (3).

3 Unscrew collar nut.

D35.25-0011-01

4 Pull off joint flange (3) using  puller (02).

5 Check sealing surfaces of joint flange (3) for wear score marks, if necessary, replace joint flange (3) as per findings.