ar3530d430005s
Install tapered roller bearings on differential housing
Type ar · emne 35.30 · version 0101 · 2015-06-02
Gælder for: Rear axle 741.421/422/423/453/454/455 in model 906 Rear axle 741.421/455 in model 900
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 900 · Serie 906
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 900 · Serie 906
Gælder også for motorer/gearkasser: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455
AR35.30-D-4300-05S
| Install tapered roller bearings on differential housing
|
|
|
Rear axle
| 741.421/422/423/453/454/455 in model 906
|
Rear axle
| 741.421/455 in model 900
|
1
| Heat up tapered roller bearing (1) to approx. 80 °C.
|
2
| Mount tapered roller bearing (1) flush to differential (2).
|
|
| Mount tapered roller bearing (1) without use of force.
|
3
| Using a feeler gauge (thickness 0.05 mm), check that tapered roller bearing (1) is lying flat against differential (2).
|
|
| The tapered roller bearing (1) must lie flush against the differential (2).
|
