ar3530d430005a

Install tapered roller bearings on differential housing

Type ar · emne 35.30 · version 0107 · 2011-07-11

Gælder for: REAR AXLE 741.130 /131 /40 /412 /413 /414 /415 /416 /420 /43 /52 /53 /54 /55 REAR AXLE 741.408 /409 in MODEL 690.6 REAR AXLE 741.428 in MODEL 8AC906.133 /631 /633 /635 with CODE (ZL3) National version for Latin America REAR AXLE 741.429 in MODEL 8AC906.153 /155 /655 /657 with CODE (ZL3) National version for Latin America

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 690 (modeller 6**) · Serie 906 (modeller 133, 153, 155, 631, 633, 635, 655, 657)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 690 (modeller 6**) · Serie 906 (modeller 133, 153, 155, 631, 633, 635, 655, 657)

Gælder også for motorer/gearkasser: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 412, 741 413, 741 414, 741 415, 741 416, 741 420, 741 428, 741 429, 741 43*, 741 52*, 741 53*, 741 54*, 741 55*

AR35.30-D-4300-05A

Install tapered roller bearings on differential housing

Install tapered roller bearings on differential housing
Install tapered roller bearings on differential housing

D35.30-0038-01

D35.30-0037-01

1 Heat up both tapered roller bearings to approx. 80 °C

2 Drive on tapered roller bearing (2) as far as the end stop using a suitable drift (1).

3 Check contact of tapered roller bearings on differential case using a feeler gauge (thickness 0.05).

The tapered roller bearings must be flush.