ar3530d430001s
Pull tapered roller bearing off drive pinion, press on
Type ar · emne 35.30 · version 0101 · 2015-06-02
Gælder for: Rear axle 741.421/422/423/453/454/455 in model 906 Rear axle 741.421/455 in model 900
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 900 · Serie 906
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 900 · Serie 906
Gælder også for motorer/gearkasser: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455
AR35.30-D-4300-01S
| Pull tapered roller bearing off drive pinion, press on
|
|
|
Rear axle
| 741.421/422/423/453/454/455 in model 906
|
Rear axle
| 741.421/455 in model 900
|
Detachment of tapered roller bearing
1
| Mount isolating blade (02) of puller (01) onto tapered roller bearing.
|
|
| Check isolating blade (02) is correctly mounted.
Incorrect installation will result in damage to the drive pinion.
|
2
| Mount puller (01) onto isolating blade (02).
|
3
| Detach tapered roller bearing from drive pinion.
|
Pressing on of tapered roller bearing
4
| Mount tapered roller bearing flush on drive pinion using suitable assembly sleeve.
|
|
| The sleeve may only touch the tapered roller bearing on the inner race.
Otherwise the tapered roller bearing will be damaged.
|
|
| Mount tapered roller bearing with 40 kn through a hydraulic press up to the end stop.
|
5
| Using a feeler gauge (thickness 0.05 mm), check that tapered roller bearing is lying flat against drive pinion.
|
The tapered roller bearing must be flush fitted to the drive pinion.
