Serier
da
ar3530b430102xb
Detach tapered roller bearing from ring gear
Type ar · emne 35.30 · version 0202 · 2020-02-04
Gælder for: Rear axle 742.824, 743.457, 746.881/882 in model 368.0/1, 384.2/3 Rear axle 742.825 in model 368.0/1, 384.3 Rear axle 746.270 in model 382.1, 634.0 Rear axle 746.271 in model 382.1, 634.0 Rear axle 746.888 in model 368 Rear axle 746.984 in model 384 Rear axle 746.987/988/996/998 in model 958.1 Rear axle 746.999 in model 384.067
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 368 · Serie 382 (modeller 1**) · Serie 384 · Serie 634 (modeller 0**) · Serie 958 (modeller 1**)
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 368 · Serie 382 (modeller 1**) · Serie 384 · Serie 634 (modeller 0**) · Serie 958 (modeller 1**)
Gælder også for motorer/gearkasser: 742 824, 742 825, 743 457, 746 270, 746 271, 746 881, 746 882, 746 888, 746 984, 746 987, 746 988, 746 996, 746 998, 746 999
AR35.30-B-4301-02XB
Detach tapered roller bearing from ring gear
Caution
Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
AS00.00-Z-0017-01A
Rear axle
742.824, 743.457, 746.881/882 in model 368.0/1, 384.2/3
Rear axle
742.825 in model 368.0/1, 384.3
Rear axle
746.270 in model 382.1, 634.0
Rear axle
746.271 in model 382.1, 634.0
Rear axle
746.888 in model 368
Rear axle
746.984 in model 384
Rear axle
746.987/988/996/998 in model 958.1
Rear axle
746.999 in model 384.067
The tapered roller bearings of the ring gear and of the differential case must always be replaced together.Remove
1
Install the pressure piece on the ring gear (1).
Only one side of the drift fits in the crown gear.
2
Install the claws of the puller under the taper roller bearing cage (2).
3
Support the puller over the pressure piece and extract the tapered roller bearing (2) from the ring gear (1).
