ar3520w0320a
Disassemble/assemble rear wheel hub
Type ar · emne 35.20 · version 0108 · 2018-10-19
Gælder for: Rear axle 740.89, 748.23/24/27/70 in model 374, 375.3, 930, 932, 933, 934, 949, 950, 952, 953, 954, 958 except code KR83 (Tire pressure control system)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.20 Hjulleje, nav — Serie 374 · Serie 375 (modeller 3**) · Serie 930 · Serie 932 · Serie 933 · Serie 934 · Serie 949 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 958
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.41 hjulholder/akselspindel/hjulnav/hjulleje — Serie 374 · Serie 375 (modeller 3**) · Serie 930 · Serie 932 · Serie 933 · Serie 934 · Serie 949 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 958
EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.42 hjulholder/akselspindel/hjulnav/hjulleje — Serie 374 · Serie 375 (modeller 3**) · Serie 930 · Serie 932 · Serie 933 · Serie 934 · Serie 949 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 958
Gælder også for motorer/gearkasser: 740 89*, 748 23*, 748 24*, 748 27*, 748 70*
AR35.20-W-0320A
| Disassemble/assemble rear wheel hub
| 04.10.2018
|
Rear axle
| 740.89, 748.23/24/27/70 in model 374, 375.3, 930, 932, 933, 934, 949, 950, 952, 953, 954, 958
|
|
| except code KR83 (Tire pressure control system)
|
30.06.2016
| Document revised completely.
|
|
|
1
| Bearing outer race (outer tapered roller bearing)
|
2
| Wheel hub
|
3
| Bearing outer race (inner tapered roller bearing)
|
4
| Inner tapered roller bearing
|
Warning
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
| Wear protective gloves, protective clothing and safety glasses, if necessary.
| AS00.00-Z-0002-01A
|
| Disassemble
|
|
|
1
| Remove wheel hub
|
| AR35.20-W-0310B
|
2
| Pull out inner tapered roller bearing (4) out of wheel hub (2)
|
|
|
3
| Remove bearing outer race (3)
| Puller
| *000589163300
|
4
| Remove bearing outer race (1)
| Counter stay
| *000589713300
|
|
|
| Internal extractor
| *001589003300
|
| Assemble
|
|
|
5
| Heat wheel hub (2) in area of bearing outer race (1) to approx. 80 °C and install bearing outer race (1) until it abuts
| If necessary, use a drift to drive in bearing outer race (1).
|
|
6
| Heat wheel hub (2) in area of bearing outer race (3) to approx. 80 °C and install bearing outer race (3) until it abuts
| If necessary, use drift to drive in bearing outer race (3).
|
|
7
| Insert inner tapered roller bearing (4) into wheel hub (2)
|
|
|
8
| Install wheel hub
|
| AR35.20-W-0310B
|
Henviste dokumenter
