Hub
Number | Designation | Rear axle 742.5 | |||
BA35.20-N-1003-06C | Grooved nut, wheel hub to axle tube | Right-hand thread | Nm | 700 | |
Left-hand thread | 1st stage | Nm | 200 | ||
2nd stage | ° | 47 | |||
Prong wrench
742 589 01 07 00
W35.20-1025-05
Slotted nut with left-hand thread
1 Tighten slotted nut to the specified torque .
2 Mark the left edge of the uppermost groove and the claw-type wrench (arrow A).
3 Mark the position of the right-hand edge of the groove running counterclockwise on the thrust plate (arrow B).
4 Tighten the slotted nut counterclockwise until the two markings match (arrow C).
The tightening rotation angle corresponds roughly to the value specified in the table (°).