ar3520p0113v

Remove/install thrust arm

Type ar · emne 35.20 · version 0107 · 2011-09-06

Gælder for: MODEL 171, 172

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.20 Hjulleje, nav — Serie 171 · Serie 172

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.40 tværgående styrestang/styring/stabilisator — Serie 171 · Serie 172

AR35.20-P-0113V

Remove/install thrust arm

31.8.11

MODEL 171, 172

Remove/install thrust arm

P35.20-2127-06

Illustrated on model 171

5 Thrust arm

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

While working on the rear axle care must be taken to ensure that the surfaces of aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the of the parts will be reduced.

1

Remove left or right wheel

AP40.10-P-4050V

2

Detach thrust arm (5) from wheel carrier

*BA35.20-P-1003-05A

3

Detach thrust arm (5) from rear axle carrier

*BA35.20-P-1001-05A

4

Install in the reverse order

Only tighten nuts and bolts of chassis components when vehicle is in a ready-to-drive condition.

Torque strut

Number

Designation

Model
171

Model
172

BA35.20-P-1001-05A

Self-locking nut, thrust arm to rear axle carrier

Stage 1

Nm

50

50

Stage 2

°

45

45

BA35.20-P-1003-05A

Self-locking nut, thrust arm to wheel carrier

Stage 1

Nm

50

50

Stage 2

°

45

90

Henviste dokumenter