ar3520p011002a

Inserting sleeve for camber strut in wheel carrier

Type ar · emne 35.20 · version 0100 · 1998-07-29

Gælder for: MODEL 129, 170, 202, 208 as of 1.2.98, 210 as of 1.1.98

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.20 Hjulleje, nav — Serie 129 · Serie 170 · Serie 202 · Serie 208 · Serie 210

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.40 tværgående styrestang/styring/stabilisator — Serie 129 · Serie 170 · Serie 202 · Serie 208 · Serie 210

AR35.20-P-0110-02A

Inserting sleeve for camber strut in wheel carrier

Diameter of wheel carrier bores modified

BT35.20-P-0005-01A

Bolted connection of camber strut to wheel carrier modified

BT35.20-P-0007-01A

Inserting sleeve for camber strut in wheel carrier

P35.20-2014-01

If a new camber strut (2) is installed on a previous version of the wheel carrier (attachment bore dia. in wheel carrier approx. 13.5 mm), it is absolutely essential to fit the sleeve (2h) in the wheel carrier (7) to reduce the diameter to approx. 12.2 mm.

Henviste dokumenter