Wheel location
Number | Designation | Model 163 | |
BA35.20-P-1002-07A | Self-locking nut, follower joint of upper transverse control arm to wheel carrier | Nm | 50 |
163 589 01 43 00
Press
Support
Thrust piece
129 589 10 63 00
163 589 03 43 00
P35.20-0282-01
Pressing off
1 Unscrew self-locking nut from follower joint (91a).
2 Fit thrust piece (092).
3 Place support (091a) on rear axle shaft joint.
4 Press follower joint (91a) out of wheel carrier using press (091b).
5 Remove press, support, and pressure piece.
Installation
6 Clean conical joint.
7 Install new self-locking nut and tighten . Counterhold ball head using Allen wrench if necessary.