Serier
da
ar3520b031006te
Check and adjust wheel bearing play
Type ar · emne 35.20 · version 0400 · 2019-03-08
Gælder for: Rear axle 741.7 in model 958 Rear axle 746.213/230/231/233/305 in model 934.2, 938.14, 958.2/4 Rear axle 746.218/225 in model 382.1, 634.0 Rear axle 748.590/594 in model 934.2, 958.4
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.20 Hjulleje, nav — Serie 382 (modeller 1**) · Serie 634 (modeller 0**) · Serie 934 (modeller 2**) · Serie 938 (modeller 14*) · Serie 958
EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.41 hjulholder/akselspindel/hjulnav/hjulleje — Serie 382 (modeller 1**) · Serie 634 (modeller 0**) · Serie 934 (modeller 2**) · Serie 938 (modeller 14*) · Serie 958
Gælder også for motorer/gearkasser: 741 7**, 746 213, 746 218, 746 225, 746 230, 746 231, 746 233, 746 305, 748 590, 748 594
AR35.20-B-0310-06TE
Check and adjust wheel bearing play
Rear axle
741.7 in model 958
Rear axle
746.213/230/231/233/305 in model 934.2, 938.14, 958.2/4
Rear axle
746.218/225 in model 382.1, 634.0
Rear axle
748.590/594 in model 934.2, 958.4
27.07.2017
Added validity
Axles 746.231/ 305
15.02.2019
Axial clearance of wheel hub bearings
BE35.20-B-1001-02G
Number
Designation
Rear axle 741.710
Rear axle 746.218/225
BE35.20-B-1001-02G
Axial clearance of wheel hub bearings
mm
0,01...0,03
0,01...0,03
Number
Designation
Rear axle 748.590/594
Rear axle 746.209/213/230/233/302/301/314/315
BE35.20-B-1001-02G
Axial clearance of wheel hub bearings
mm
0,01...0,03
0,01...0,03
Number
Designation
Rear axle 746.231/305 on Type 934.2, 938.142, 958.4
BE35.20-B-1001-02G
Axial clearance of wheel hub bearings
mm
0,01...0,03
1
Position the dial gauge support with the dial gauge on the wheel hub.
2
Position the tip of the dial gauge with a pre-load in the axle's support tube.
3
Set the dial indicator to "zero".
4
Determine the axial play of the wheel hub bearings, moving the wheel hub (3) forward and back.
If nominal value is not reached, adjust the axial play of the wheel hub.
5
With the respective slotted nut, remove the external slotted nut (5) and remove the locking plate (6).
Only if the external slotted nut (5) is already installed.
6
Adjust the axial play of the wheel hub bearing loosening or tightening the inner slotted nut with the respective claw wrench.
For new tapered roller bearings, target the lowest specified value.
