ar3510t001004ca

Remove/install longitudinal control arm at rear axle

Type ar · emne 35.10 · version 0103 · 2005-07-12

Gælder for: REAR AXLE 746.211 /216 in MODEL NMB613.367 /368

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.10 Bagaksel komplet — Serie 613 (modeller 367, 368)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.40 tværgående styrestang/styring/stabilisator — Serie 613 (modeller 367, 368)

Gælder også for motorer/gearkasser: 746 211, 746 216

AR35.10-T-0010-04CA

Remove/install longitudinal control arm at rear axle

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

Control arm

Number

Designation

Model
613.367/368

BA35.15-N-1001-03C

Bolt, trailing arm to underbody

Nm

485

BA35.15-N-1002-03C

Bolt, trailing arm to rear axle carrier

Nm

485

Remove/install longitudinal control arm at rear axle

T35.10-0041-01

Installation: Replace all self-locking nuts.

1 Detach longitudinal control arm (1) from spring support (2) .

2 Detach longitudinal control arm (1) from substructure (3) .

Mark the location of the longitudinal control arms (1) and if necessary mark existing shims and when installing install in the correct position (thickness of shim:
3 mm).

3 Install in reverse sequence.

Henviste dokumenter