ar3510s003601p

Remove/install rear axle on frame

Type ar · emne 35.10 · version 0100 · 2019-07-04

Gælder for: Model 470, 471 with engine 642 Model 470, 471 with engine 699

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.10 Bagaksel komplet — Serie 470 · Serie 471

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.30 Bagaksel komplet — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 642 ***, 699 ***

AR35.10-S-0036-01P

Remove/install rear axle on frame

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

000 588 11 62 00 Major assembly mount

WS01.00-P-0092B

000 588 10 62 00 Support plate

WS26.00-P-3309B

Model

470, 471 with engine 642

Model

470, 471 with engine 699

Rear axle shock absorber

Number

Designation

Model 470, 471

BA32.25-N-1002-03P

Nut, shock absorber to body

Nm

45

Rear axle stabilizer bar

Number

Designation

Model 470, 471

BA32.35-N-1002-03P

Nut, stabilizer bar linkage to rear axle/longitudinal member stabilizer bar

Nm

80

Trailing arms, transverse control arms

Number

Designation

Model 470, 471

BA35.15-N-1001-02P

Bolt/nut, transverse control arm to frame

Nm

129

Trailing arms, transverse control arms

Number

Designation

Model 470, 471

BA35.15-N-1004-02P

Bolt/nut, upper trailing arm to frame

Nm

195

Trailing arms, transverse control arms

Number

Designation

Model 470, 471

BA35.15-N-1006-02P

Bolt/nut, lower trailing arm to frame

Nm

195

Parking brake

Number

Designation

Model 470, 471

BA42.20-N-1002-01P

Screw/bolt, rear brake cable bracket to body/rear axle/brake carrier plate

Nm

21

Remove/install rear axle on frame

S35.00-A000-09

1

Support rear axle (1) using major assembly mount and mounting plate.

Commercially available devices/tools
Tensioning strap

Secure rear axle (1) using tensioning strap.

2

Remove brake cables (13) from frame (3)   .

Proceed by first removing the screw/bolts (14).

3

Remove electrical wiring harnesses (16) at left and right from frame (3).

4

Remove shock absorbers (2) at left and right from frame (3)   .

To do so, counterhold bolts and remove nuts (4).

5

Remove torsion bar linkage (5) at left and right from frame (3)   .

To do so, remove nuts (6).

6

Remove transverse control arm (7) from frame (3)   .

To do so, counterhold bolt and remove nut (8).

7

Remove brake hoses (9) at left and right from frame (3).

For this purpose, remove retaining clips.

8

Remove springs (10) at left and right.

To do so, lower rear axle (1) until springs (10) can be removed.

9

Remove screws/bolts (11)     .

To do so, counterhold nuts (12).

Installation: Replace nuts (12).

10

Remove line (15) from frame.

To do this, remove screw (16).

11

Remove rear axle (1) from frame (3).

Two helpers required.

12

Install in the reverse order.

Henviste dokumenter