Remove/install front rear axle center assembly mount · ar3510d2490h · Mercedes-Benz WIS

AR35.10-D-2490H

Remove/install front rear axle center assembly mount

13.3.07

REAR AXLE 741.417 in MODEL 906.132 /134 /136

D35.10-1115-11

2 Propeller shaft

3 Rear axle differential bracket

5 Vent line

6 Handbrake cable

7 Bracket

8 Handbrake cable

10 Rear axle center assembly

12 Bracket

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Lift/jack up vehicle		AR00.60-D-1000H
2	Secure vehicle on lifting platform		AR00.60-D-0100H
3	Support rear axle differential (10) using transmission jack
4	Unscrew bracket (7) of hand brake cable (6)	 To do this, unscrew bolt (9).
5	Unscrew bolts (4) from front rear axle differential bracket (3) on rear axle differential (10)		*BA35.30-N-1006-02A
6	Unscrew bolt (1) from front rear axle differential bracket (3) on subframe		*BA35.30-N-1005-02A
7	Remove rear axle differential bracket (3)
8	Install in the reverse order

 Rear axle drive

Number	Designation				Rear axle 741.417 in model 906


BA35.30-N-1005-02A	Bracket, rear axle gear at front to subframe	M141.5		Nm	172
BA35.30-N-1006-02A	Bracket, rear axle gear at front to rear axle gear	M141.5	Stage 1	Nm	50
			Stage 2	°	90