ar3340p0403gg

Remove, install differential lock shift cylinder

Type ar · emne 33.40 · version 0117 · 2020-02-06

Gælder for: Model 460, 461 (except 461.331) with code A70 (Differential lock, front axle) Model 463 (except 463.270/271) up to model year 2013 with code A70 (Differential lock, front axle)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.40 Differentialespærringer — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.38 Gearskifte — Serie 460 · Serie 461 (modeller 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Serie 463 (modeller 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR33.40-P-0403GG

Remove, install differential lock shift cylinder

04.02.2020

Model

460, 461 (except 461.331)

with code A70 (Differential lock, front axle)

Model

463 (except 463.270/271)

up to model year 2013

with code A70 (Differential lock, front axle)

Remove, install differential lock shift cylinder

1

Shift cylinder

P33.40-0217-01

Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Topical note

Brake fluid notes

AH42.50-P-0001-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Remove

1

Lift vehicle with vehicle lift.

AR00.60-P-1000G

2

Mark installation position of shift cylinder (1) relative to axle tube.

If shift cylinder (1) is to be reused.

3

Remove union nut and disconnect electrical connector from shift cylinder (1).

4

Remove hydraulic line from switch cylinder (1) and seal openings using suitable stop plug.


Brake fluid must not leak out.
Otherwise the paint will be damaged.

Collect any escaping brake fluid using rags.

Record plug

*129589009100

Box wrench bit

*000589750300

5

Unscrew screws of shift cylinder (1) on axle tube and remove shift cylinder (1).

Install

6

Install shift cylinder (1).

Replace seal.

Note the previously made marking when reusing the shift cylinder (1).

Bolt, shift cylinder to axle tube

*BA33.40-P-1003-01A

If the shift cylinder (1) was disassembled or parts of the differential lock were replaced,

adjust the shift cylinder (1).

Adjust shift cylinder for differential lock of front axle

AR33.40-P-0406-01A

7

Connect electrical connector to shift cylinder (1) and attach union nut.

8

Attach hydraulic line to shift cylinder (1).

Union nut, hydraulic line to shift cylinder/differential lock

*BA35.40-P-1008-01A

Box wrench bit

*000589750300

9

Bleed hydraulic system of differential lock.


Model 460, 461 (except 461.331)
with code A70 (Differential lock, front axle)
Model 463 (except 463.270/271)
up to model year 2013
with code A70 (Differential lock, front axle)

AR33.40-P-0701GG

10

Lower vehicle with vehicle lift.

AR00.60-P-1000G

Differential lock shift cylinder

Number

Designation

Model 460, 461

Model 463
up to model year 2019

BA33.40-P-1003-01A

Bolt, shift cylinder to axle tube

Nm

25

25

Differential lock shift cylinder

Number

Designation

Model 460, 461
Model 463
up to model year 2019

BA35.40-P-1008-01A

Union nut, hydraulic line to shift cylinder/differential lock

Nm

15

Remove, install differential lock shift cylinder
Remove, install differential lock shift cylinder

129 589 00 91 00

Record plug

000 589 75 03 00

Box wrench bit

Henviste dokumenter