Remove/install through-drive shaft · ar3330w0491a · Mercedes-Benz WIS

AR33.30-W-0491A

Remove/install through-drive shaft

12.4.10

FRONT AXLE 730.102/ 110

W35.30-0001-06

1 Threaded ring

2 Through-drive shaft

3 Screw

4 Locking plate

5  Claw-type wrench

6  Ratio wrench

 	Remove/install
1	Remove threaded ring (1)	 Installation: Coat threaded ring with sealant.	*BR00.45-Z-1015-01A
			*BA33.30-N-1007-06A
			*BA33.30-N-1011-06A
			*740589006300
			*000589696300
2	Remove through-drive shaft (2) by tapping gently with a plastic mallet	 Installation: When installing, ensure that the radial sealing rings in the threaded ring (1) are not damaged.
3	Install in the reverse order

 Differential assembly with through-drive

Number	Designation		Front axles 730.102/110


BA33.30-N-1007-06A	Bolt, locking plate to through-drive pinion housing	Nm	25
BA33.30-N-1011-06A	Threaded ring, through-drive shaft in axle housing	Nm	1000

740 589 00 63 00

000 589 69 63 00

Ratio wrench

Assembly wrench

Repair materials

Number	Designation	Order number
BR00.45-Z-1015-01A	Loctite 5203 sealant	A 002 989 71 20 10