AR33.30-W-0396MA | Disassemble/assemble through-drive cover with input shaft | 11.7.07 |
FRONT AXLE 730.116
1 Through-drive cover
2 Bearing outer race
3 Tapered roller bearing
4 Input shaft
5 Through-drive housing
W35.30-1037-03
| Disassemble | ||
1 | Remove through-drive cover (1) | ||
2 | Pull input shaft (4) out of through-drive housing (5) | ||
3 | Remove tapered roller bearing (3) from input shaft (4) | Prop up with the lower section of the puller and pry off using the hydraulic press. | |
| |||
4 | Remove bearing outer race (2) inwards out of the through-drive cover (1) | ||
| Assemble | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
5 | Heat up cover of through-drive (1) in the area of the bearing outer race (2) to approx. 80 °C and install bearing outer race (2) | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
6 | Heat up bearing outer race (3) to approx. 80 °C and assembly until it abuts on the drive shaft (4) | Continue driving on if necessary using a drift. | |
7 | Insert input shaft (4) into through-drive housing (5) | ||
8 | Install through-drive cover (1) |
Puller
000 589 45 33 00
Henviste dokumenter
- ar3330w0350ma
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande