ar3330p066002a

Driving out and pressing on outer joint

Type ar · emne 33.30 · version 0102 · 1999-09-22

Gælder for: MODEL 210.08 /28

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 210 (modeller 08*, 28*)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel — Serie 210 (modeller 08*, 28*)

AR33.30-P-0660-02A

Driving out and pressing on outer joint

Driving out and pressing on outer joint

P33.30-0253-01

Driving out

1 Drive out outer joint ring (60l) using 27 mm open-end wrench.

First version illustrated

Driving out and pressing on outer joint

P33.30-0254-01

Pressing on

2 Check circlip (60f) and replace if necessary.

3 Push disk spring (60g) and intermediate ring (60h) onto front axle shaft.

4 Press on outer joint ring (60l), the circlip (60f) must lock in position in the joint hub.

First version illustrated